Admin

Latest

• Ti-6Al-4V Hybrid Structure Mechanical Properties – Wrought and Additive Manufactured Powder-Bed Material
• M$_7$C$_3$: The Story of a Misunderstood Carbide
• Experimental and numerical study of the interaction between dynamically loaded cracks and pre-existing flaws in edge impacted PMMA specimens.
• Unsupervised Machine Learning in Fractography: Evaluation and Interpretation
• Damage evolution around an embedded pore in quasi-static shear dominant compression and tension specimens
• GTN Model-Based Material Parameters of AZ31 Magnesium Sheet at Various Temperatures by Means of SEM In-Situ Testing
• High-speed infrared thermal measurements of impacted metallic solids
• TEM and High Resolution TEM Investigation of Phase Formation in High Entropy Alloy AlCrFe2Ni2
• The BCC-FCC Phase Transformation Pathways and Crystal Orientation Relationships in Dual Phase Materials From Al-(Co)-Cr-Fe-Ni Alloys
• Toward quantitative fractography using convolutional neural networks
• Correlating fracture toughness and fracture surface roughness via correlation length scale
• Damage evolution around shear loaded intervoid ligaments in plane strain and plane stress
• Design principles of biologically fabricated avian nests
• Influence of Grain Size Distribution on Ductile Intergranular Crack Growth Resistance
• Influence of strain rate sensitivity on localization and void coalescence
• Interfacial Effect on the Deformation Mechanism of Bulk Nanolaminated Graphene-Al Composites
• Intergranular fracture prediction and microstructure design
• On the micromechanism of inclusion driven ductile fracture and its implications on fracture toughness
• Reassessment of the Dynamic Thermomechanical Conversion in Metals
• Strengthening and deformation mechanisms in nanolaminated graphene-Al composite micro-pillars affected by graphene in-plane sizes
• Strengthening and deformation mechanisms in nanolaminated single-walled carbon nanotube-aluminum composites
• The effect of internal pressure in gas pores containing materials on their mechanical stability under shear
• A new specimen for growing dynamic cracks along a well defined path using stress wave loading
• Analysis and design of dual-phase steel microstructure for enhanced ductile fracture resistance
• On a dislocation-based constitutive model and dynamic thermomechanical considerations
• Orientation-Dependent Tensile Behavior of Nanolaminated Graphene-Al Composites: An In Situ Study
• Random distributions of initial porosity trigger regular necking patterns at high strain rates
• Sensitivity of Arterial Hyperelastic Models to Uncertainties in Stress-Free Measurements
• Thermo-mechanical characterization and dynamic failure of near $α$ and near $β$ titanium alloys
• Engineering the crack path by controlling the microstructure
• Mechanical Characterization of Impact-Induced Dynamically Recrystallized Nanophase
• The dependence of the Taylor–Quinney coefficient on the dynamic loading mode
• The genesis of adiabatic shear bands
• Grain boundary crack growth in metastable titanium $β$ alloys
• The effect of loading rate on ductile fracture toughness and fracture surface roughness
• Why does necking ignore notches in dynamic tension?
• Effect of inclusion density on ductile fracture toughness and roughness
• Dynamic tensile necking: Influence of specimen geometry and boundary conditions
• International Journal of Impact Engineering Finite element analysis of AISI 304 steel sheets subjected to dynamic tension : The effects of martensitic transformation and plastic strain development on fl ow localization
• The respective influence of microstructural and thermal softening on adiabatic shear localization
• Microstructural effects on adiabatic shear band formation
• Microstructural heterogeneity and dynamic shear localization
• On the dynamic character of localized failure
• Dynamic failure by adiabatic shear banding
• Fingerprints of classical chaos in manipulation of cold atoms in the dynamical tunneling experiments
• Controlled tunneling of cold atoms: from full suppression to strong enhancement.